RUHSTRAT Binding Posts, Sockets, Lead-through Bolts

RUHSTRAT, Binding Posts, Sockets, Lead-through BoltsRUHSTRAT binding posts, sockets, lead-through bolts are used in all sectors of industry in inspection and laboratory facilities, and for bushings for transformers and chokes.

We use only temperature-resistant insulating material, suitable for binding posts with glass-fibre reinforced insulation material up to 160°C. The protection against accidental contact with our contact-voltage-proof binding posts is ensured in accordance with VDE regulations, IEC 664 and IEC 1010.

Binding, Posts, Electric, Shock, Hazard, RUHSTRAT, Enercorp, InstrumentsBinding Posts, Protected Against Electric-Shock Hazard

Protection against electric-shock hazards (according to VDE 0100, part 410 and 723, VDE 0104, VDE 0110, VDE 0411 and VDE 0470 as well as IEC 664 and IEC 1010) is guaranteed:

•with lug connection after connecting without voltage, if suitable insulation-armored lugs are used
•with connection via 4 mm safety plug with fixed collar

Product Catalog

Data Shee

 

Lead Through Bolts, RUHSTRAT

Binding Posts

RUHSTRAT binding posts are used in all sectors of industry in inspection and laboratory facilities, and for bushings for transformers and chokes.

Product Catalog

Data Sheet

 

Lead Through Bolts, RUHSTRAT

Binding Posts With Flat Clamp

RUHSTRAT binding posts with flat clamp are used in all sectors of industry in inspection and laboratory facilities, and for bushings for transformers and chokes.

Product Catalog

Data Sheet

 

Lead Through Bolts, RUHSTRAT

Lead-through Bolts, Oiltight

Gasket rings are optionally available made of high-pressurec sealing material (SIL C 4400, green), free of asbestos, for smooth surfaces, or made of nitril butadiene caoutchouc (Perbunan) for rough surfaces.

For proper installation, the flange washer fixed to the bolt has to be located inside the enclosure.

In general, first lock the lead-through bolt with the lower nut; leave a space and than make the electrical connection between the two remaining nuts.

Product Catalog

Data Sheet

 

Lead Through Bolts, RUHSTRAT

Lead Through Bolts, RUHSTRATLead-through Bolts

Gasket rings are optionally available made of high-pressurec sealing material (SIL C 4400, green), free of asbestos, for smooth surfaces, or made of nitril butadiene caoutchouc (Perbunan) for rough surfaces.

For proper installation, the flange washer fixed to the bolt has to be located inside the enclosure.

In general, first lock the lead-through bolt with the lower nut; leave a space and than make the electrical connection between the two remaining nuts.

Product Catalog

Data Sheet

 

Lead Through Bolts, RUHSTRAT

Sockets

RUHSTRAT sockets are used in all sectors of industry in inspection and laboratory facilities, and for bushings for transformers and chokes.

Product Catalog

Data Sheet

 

Lead Through Bolts, RUHSTRAT | Back To Binding Posts


ENERCORP INSTRUMENTS LIMITED

About Enercorp

Enercorp Instruments Ltd is a Manufacturer of Temperature, Pressure & Humidity Instrumentation. Used for Industrial, Food Processing, Climate Monitoring & Energy Management Applications.

Sitemap

Enercorp Products

Our products include temperature, pressure, humidity & climate instruments for sensing, controlling, recording and indicating; as well as wind speed & direction systems, RTD elements, smokehouse probes & custom built RTD, thermocouple and thermistor temperature sensors, temperature transmitters/transducers, thermowells, moisture meters, signal conditioners, power supplies, air quality & gas monitors..

Contact Enercorp

  • Toll Free:
    1-800-363-2677
  • Telephone:
    416-231-5335
  • Fax:
    416-231-7662
  • Email and Website:
    sales@enercorp.com www.enercorp.com
  • Head Office:
    25 Shorncliffe Road,
    Toronto, ON
    M9B 3S4 Canada